Page 1 of 2

Made this sheath for a Buck 110?

Posted: Tue May 14, 2019 9:28 am
by White Falcon
Never saw a 110 like this. Not even the same size as a standard 110, about 1/8" + or - all measurements smaller. But a heaver knife.Looks like chrome or very high polish, and finger groves on scales. I made it so the big end would be at the bottom so it would stay in better. All looked factory and no personal mods.

Re: Made this sheath for a Buck 110?

Posted: Tue May 14, 2019 9:43 am
by Captainkirk
Very nice, Grant!

Re: Made this sheath for a Buck 110?

Posted: Tue May 14, 2019 10:07 am
by Graps
Nice 👍

Re: Made this sheath for a Buck 110?

Posted: Tue May 14, 2019 10:20 am
by White Falcon
Thanks! Anyone else have this knife?

Re: Made this sheath for a Buck 110?

Posted: Tue May 14, 2019 11:07 am
by Carpdaddy
You did good!

Re: Made this sheath for a Buck 110?

Posted: Tue May 21, 2019 1:22 pm
by slowbowjoe2
Not a 110, but I've had a 112 for almost 40 years. Made a similar pouch style sheath for mine, with some softer buckskin. Like it a lot better than the standard issue Buck sheath.

Re: Made this sheath for a Buck 110?

Posted: Tue May 21, 2019 10:07 pm
by Elkman
I have the 501. Been using it for ever it seems.

Re: Made this sheath for a Buck 110?

Posted: Thu May 23, 2019 6:23 am
by Grizzly
Nice pouch.

I had a 110 in the 70's and a Schrade+ copy of the 110 I hunted with in the early 90's until I dropped the blade into some tall grass and lost it. Now I can't find either. I went to a Gerber Gator and a Wyoming knife after that.

I wonder if those dimensions changed with the addition of the finger groove scales. The rivets also are gone on your model that has some sort of synthetic scales bonded on. Is the high polish that looks like chrome actually the brass, that these were made of?

Re: Made this sheath for a Buck 110?

Posted: Thu May 23, 2019 7:08 am
by White Falcon
Could be, is thinner, and all steel. No brass on this knife. Never saw one like this.

Re: Made this sheath for a Buck 110?

Posted: Thu May 23, 2019 2:27 pm
by Grizzly
Reading up on them, some were nickle silver (my guess for yours). Does it tarnish some? Does anyone know if nickel silver tarnishes? Some custom models could be stainless and even titanium.